• Heat stabilised white polypropylene clips
• Large base design
• High stand off allows for lagging and heat circulation
• Hinge design for repeated opening and closing
• Working temperature range up to 110°C

Spacers

• Comply with British Water supply bye-law 49
• Provides clearance for lagging up to 30mm thick

• Copper or brass options

• White polypropylene pipe clips
• Central hole fixing for both single and double clips
• Can be assembled together using the unique locking mechanism
• Special hinge reduces the risk of stress cracking
• Working temperature range -10°C to +80°C

Spacers

• Are the most effective way of fitting pipework insulation as required by water bye-law 49
• Will increase the wall clearance by 22mm

TDS

• Ideal for fixing mirrors, glass and decorative panels
• Coverhead and screw supplied separately
• Screws have a slotted countersunk head with a 5BA threaded hole to accept coverhead caps
• Bright zinc plated
• Supplied in labelled hanging poly bags

• Manufactured from premium grade white polymer
• Hardened steel, bright zinc plated nails

• Can be cut to fit around pipes close to adjacent walls
• Avoids the need to make good around every pipe that passes through a wall
• Can be fitted to existing pipe work
• Manufactured from premium grade polymer in two finishes
• Supplied in labelled hanging poly bags

• Fit most radiator valves
• Solid brass material
• Used to release trapped air from water filled radiators

• Copper pipe cutters
• Automatically adjusts to fit pipe
• Hardened precision cutting wheel
• Two rollers for smooth operation
• Ideal for working in confined spaces
• Replacement cutting wheel suitable for both sizes of cutter
• Supplied individually in hanging blister packs

• 2 part decorative plastic dome and collar set
• For covering screw and other fastener heads (6 - 8 gauge)
• Supplied in boxes of 200 domes and 200 collars

TDS

Surface Cup Washers

• Decorative fnish for screw heads
• Eliminates the need for countersunk holes
• Ideal for use with soft materials such as wood, composite board, plastic sheet and fabric covering
• Supplied in hanging blister pack

TDS

• Available in solid cast brass or pressed brass
• Bright finish

• Plastic flush ftting screw top for countersunk cross screws
• Suitable for 6 - 10 gauge screws
• Available in a wide range of colours
• Supplied in labelled hanging poly bags

TDS

• Suitable for most wall and floor tiles
• Supplied in poly bags with hanging header cards

• Designed for the fixing of wash basins, bidets and other sanitary items
• The nylon collar has a large surface and prevents contact between the metal elements and the unit to be fixed
• Ideal for use in concrete, full and half brick
• Two fixings per bag
• Supplied in labelled hanging poly bags

Type A Contents

2 nylon plugs, 2 zinc plated studscrews and 2 collar nuts.

Type B Contents

2 nylon plugs, 2 zinc plated studscrews, 2 nylon bushes, 2 zinc plated nuts and 2 zinc plated washers.

• White or chrome cover caps
• Supplied in poly bags with hanging header card

DoP - Coach Screws

• White or chrome cover caps
• Side mounting
• Supplied in poly bags with hanging header card

DoP - Coach Screws

• Can easily be interlocked into pairs or banks of three or more in any combination of sizes. The pipes are then always evenly spaced and the clips always in line
• Provide complete 360° pipe retention, tested to over 100lbs. pull
• Manufactured from premium grade natural polymer, formulated for low temperature impact resistance and high temperature tensile strength
• Working temperature range -10°C to +80°C
• Have an integral hinge moulded into the clip
• Are strong, secure and versatile which ensures optimum performance in all site conditions

Spacers

• Are the most effective way of fitting pipework insulation as required by water bye-law 49
• Fit all clips and will increase the wall clearance from 12mm to 25mm
• Can be stacked and each additional spacer gives 13mm more clearance

• Manufactured from premium grade polymer
• Hardened steel bright zinc plated nails
• Working temperature range -10°C to +80°C

• Can be cut to fit around pipes close to adjacent walls
• Avoids the need to make good around every pipe that passes through a wall
• Can be fitted to existing pipe work
• Manufactured from premium grade polymer in a range of colours
• Supplied in labelled hanging poly bags

Fixing

• Easy to fit using either Talon hinged pipe clips or back plates
• Fit clips directly to the wall and simply press cover over clip and snap into place
• Back plates provide an alternative method of fitting. They can be used with existing pipe runs, different sizes of pipe and provide additional support for the cover in difficult applications. They can be used with either size of double pipe cover. Four evenly spaced back plates are recommended per length of cover
• Design of cover ensures that slight irregularities in the wall surface are accommodated without cutting
• Pipe cover is supplied in 3 metre lengths which can easily be cut on site
• Range of accessories for the double pipe run should be fitted using PVC cement or double sided tape

Specification

• Extruded white PVCu to BS 4576
• Self extinguishing
• Resistant to both acid and alkalis
• Colour fast to standard 5
• Good resistance to weathering makes it suitable for exterior use as well as interior use. It can be used within a temperature range of -10°C to +80°C
• Talon pipe cover is the ideal way to conceal surface mounted pipe runs such as the flow and return pipes of a domestic central heating system
• The cover section is produced to suit 15mm and 22mm diameter pipes in single or double runs
• A range of accessories is available to suit the double run pipe sections
• Cover section only is available to suit single runs of 28mm pipe