• The ultimate screw for tongue and groove floorboards
• Small diameter countersunk head with Torx T-10 recess
• TRI-LOCK™  TS threadform reduces surface contact when driving in
• Hardened and NET-COAT™  yellow plated for corrosion protection
• TS thread profile provides benefits of both single and twin thread design
• One size only (3.5 x 45mm) suitable for most popular floorboards currently available
• Can be removed for access
• Two free driver bits in every box

Installation

• Insert at 30° to exposed face on tongue side where tongue and face intersect
• Drive through board into substrate
• Ensure head is below surface to prevent interference with next board
• Fit screw every 300mm
• If within 50mm of board end pre drill hole to prevent splitting

DoP

• • The ultimate screw for tongue and groove floorboards
  • Small diameter countersunk head with Torx T-10 recess
  • TRI-LOCK™  TS threadform reduces surface contact when driving in
  • NET-COAT™  stainless steel gives the highest possible corrosion resistance and is ideal for external use
  • TS thread profile provides benefits of both single and twin thread design
  • One size only (3.5 x 45mm) suitable for most popular floorboards currently available
  • Can be removed for access
  • Two free driver bits in every box

  Installation

  • Insert at 30° to exposed face on tongue side where tongue and face intersect
  • Drive through board into substrate
  • Ensure head is below surface to prevent interference with next board
  • Fit screw every 300mm
  • If within 50mm of board end pre drill hole to prevent splitting

   

  DoP