• Heat stabilised white polypropylene clips
• Large base design
• High stand off allows for lagging and heat circulation
• Hinge design for repeated opening and closing
• Working temperature range up to 110°C

Spacers

• Comply with British Water supply bye-law 49
• Provides clearance for lagging up to 30mm thick

• Manufactured from premium grade white polymer
• Low temperature impact resistance
• High temperature tensile strength
• Working temperature range -10°C to +80°C

Spacers

• Are the most effective way of fitting pipework insulation as required by water bye-law 49
• Fit all clips and will increase the wall clearance from 12mm to 25mm
• Can be stacked and each additional spacer gives 13mm more clearance

• White polypropylene pipe clips
• Central hole fixing for both single and double clips
• Can be assembled together using the unique locking mechanism
• Special hinge reduces the risk of stress cracking
• Working temperature range -10°C to +80°C

Spacers

• Are the most effective way of fitting pipework insulation as required by water bye-law 49
• Will increase the wall clearance by 22mm

TDS

The Talon EZ Joist Clip offers a safer and easier install whilst stood side on for pipework above your head. Manufactured in the UK this high-quality polypropylene clip provides the user a secure fixing. All sizes of the EZ Joist Clip can be connected together via the dovetail to allow for equal pipe spacing.

The Talon EZ Joist Clip creates an easier and speedy installation for pipes in hard to reach locations.

• Much easier and safer to attach the clips stood side on above your head
• Speed of installation
• 360 degree retention
• Time saving
• Can be positioned and fixed whilst pipe is in situ
• EZ Joist Clips can be linked together
• Manufactured in the UK to ISO standards

• Can easily be interlocked into pairs or banks of three or more in any combination of sizes. The pipes are then always evenly spaced and the clips always in line
• Provide complete 360° pipe retention, tested to over 100lbs. pull
• Manufactured from premium grade natural polymer, formulated for low temperature impact resistance and high temperature tensile strength
• Working temperature range -10°C to +80°C
• Have an integral hinge moulded into the clip
• Are strong, secure and versatile which ensures optimum performance in all site conditions

Spacers

• Are the most effective way of fitting pipework insulation as required by water bye-law 49
• Fit all clips and will increase the wall clearance from 12mm to 25mm
• Can be stacked and each additional spacer gives 13mm more clearance

• Manufactured from premium grade white polymer
• Hardened steel, bright zinc plated nails

• Manufactured from premium grade polymer
• Hardened steel bright zinc plated nails
• Working temperature range -10°C to +80°C

• Can be cut to fit around pipes close to adjacent walls
• Avoids the need to make good around every pipe that passes through a wall
• Can be fitted to existing pipe work
• Manufactured from premium grade polymer in two finishes
• Supplied in labelled hanging poly bags

This tail kit includes Snappits and collars. Snappit is a rigid pipe finish product that is great for covering unsightly, visible, copper pipework. It is a mess-free alternative to paint - saving time and improving appearance. The pipe collars give a seamless finish at the base of the pipe.

The Material used for Snappits has colour fastness properties and is guaranteed for a minimum of 10 years lifespan.

• UV stabilised so will not discolour, chip or flake
• Made from the highest quality grade uPVC
• The simple and effective way to cover exposed pipes
• Eliminates the need for painting
• Gives a professional finish to radiators and towel rails
• Suitable for standard household 15mm pipes
• Simply cut to the required length, open up and snap around pipe

• Can be cut to fit around pipes close to adjacent walls
• Avoids the need to make good around every pipe that passes through a wall
• Can be fitted to existing pipe work
• Manufactured from premium grade polymer in a range of colours
• Supplied in labelled hanging poly bags

• Radsnaps and Pipesnaps are decorative central heating pipe covers
• The simple and effective way to cover exposed pipes
• Eliminates the need for painting
• Gives a professional finish to radiators and towel rails
• Suitable for standard household 15mm pipes
• Pre-curled plastic tubes
• Simply cut to the required length, open up and snap around pipe

Fixing

• Easy to fit using either Talon hinged pipe clips or back plates
• Fit clips directly to the wall and simply press cover over clip and snap into place
• Back plates provide an alternative method of fitting. They can be used with existing pipe runs, different sizes of pipe and provide additional support for the cover in difficult applications. They can be used with either size of double pipe cover. Four evenly spaced back plates are recommended per length of cover
• Design of cover ensures that slight irregularities in the wall surface are accommodated without cutting
• Pipe cover is supplied in 3 metre lengths which can easily be cut on site
• Range of accessories for the double pipe run should be fitted using PVC cement or double sided tape

Specification

• Extruded white PVCu to BS 4576
• Self extinguishing
• Resistant to both acid and alkalis
• Colour fast to standard 5
• Good resistance to weathering makes it suitable for exterior use as well as interior use. It can be used within a temperature range of -10°C to +80°C
• Talon pipe cover is the ideal way to conceal surface mounted pipe runs such as the flow and return pipes of a domestic central heating system
• The cover section is produced to suit 15mm and 22mm diameter pipes in single or double runs
• A range of accessories is available to suit the double run pipe sections
• Cover section only is available to suit single runs of 28mm pipe

• Available in solid cast brass or pressed brass
• Bright finish

• Copper or brass options

• Worm drive hose clips
• Band, screw and housing manufactured from mild steel with a zinc plated finish
• Manufactured to BS 5315:1991

• Worm drive hose clips
• Band, screw and housing manufactured from mild steel with a zinc plated finish
• Manufactured to BS 5315:1991
• Dimensions:
  Height 270mm
  Depth 262mm
  Width 310m

• Worm drive hose clips
• Band, screw and housing manufactured from mild steel with a zinc plated finish
• Manufactured to BS 5315:1991
• Height 370mm x Depth 180mm x Width 330mm
• Free standing or fastens to a wall

• For rapid easy adjustment of clips
• Incorporates a 7mm A/F socket head
• Highly flexible shaft makes it ideal for use in difficult to access areas

• Worm drive hose clips
• Band, screw and housing manufactured from mild steel with a zinc plated finish

• Worm drive hose clips
• Band, screw and housing manufactured from mild steel with a zinc plated finish
• Wingspade is manufactured from blue acetal plastic
• Easily tightened and repositioned without tools

• Worm drive hose clips
• Band, screw and housing manufactured from stainless steel - Grade 304
• Manufactured to BS 5315:1991
• Highly resistant to corrosion
• Ideal for use in marine applications

• Worm drive hose clips
• Band, screw and housing manufactured from stainless steel - Grade 304
• Manufactured to BS 5315:1991
• Highly resistant to corrosion
• Ideal for use in marine applications
• Free standing or fastens to a wall
• Dimensions:
  Height 370mm
  Depth 180mm
  Width 330mm

• Jubilee® Multiband is a continuous hose clip strip which provides versatile banding for almost any hose or pipe diameter
• Handy Pack - 11mm wide, 10m length of zinc plated mild steel band
• Pocket Pack - 11mm wide, 3m length of 304 grade stainless steel or mild steel band
• Simply measure required circumference, pull out & cut to length, fasten with screw and buckle
• Handy pack kit includes 10m of banding and 25 buckle assemblies
• Pocket pack kits include 3m of banding and 8 buckle assemblies
• Packaging includes measuring scale

• High strength fastening system
• Ideal for strapping items securely, particularly where tamper evidence may be required
• All stainless 304 grade components make the product suitable for many industries including industrial, agriculture, automotive, civil engineering, marine, food, petro-chemical, road signs etc.
• Suits virtually any diameter and shape
• A range of 4 band widths is available with specific buckles to suit
• Band supplied in a dispenser box

• High strength fastening system
• Ideal for strapping items securely, particularly where tamper evidence may be required
• All stainless 304 grade components make the product suitable for many industries including industrial, agriculture, automotive, civil engineering, marine, food, petro-chemical, road signs etc.
• Suits virtually any diameter and shape
• A range of 4 band widths is available with specific buckles to suit

• High strength fastening system
• Ideal for strapping items securely, particularly where tamper evidence may be required
• All stainless 304 grade components make the product suitable for many industries including industrial, agriculture, automotive, civil engineering, marine, food, petro-chemical, road signs etc.
• Tool tightens and cuts banding to required length

PTFE (Polyterafluoroethylene)

• Thread sealing tape
• Available in specifications suitable for general plumbing, potable water and gas supply fittings
• Offers a clean, quick and highly effective means of sealing threaded pipe fittings
• Shrink wrapped in sleeves
• tape conforms to BS 7786:1995, BS 6974:1989, BGC 1M/16, BS 5292 Type C
• Proved water tape conforms to BS 7786:2006 Grade L, EN 751-3 & BS 6920-1:2000 for WRAS approval, certificate no. 1307500

TDS

• Copper pipe cutters
• Automatically adjusts to fit pipe
• Hardened precision cutting wheel
• Two rollers for smooth operation
• Ideal for working in confined spaces
• Replacement cutting wheel suitable for both sizes of cutter
• Supplied individually in hanging blister packs

• Fit most radiator valves
• Solid brass material
• Used to release trapped air from water filled radiators

• Designed for the fixing of wash basins, bidets and other sanitary items
• The nylon collar has a large surface and prevents contact between the metal elements and the unit to be fixed
• Ideal for use in concrete, full and half brick
• Two fixings per bag
• Supplied in labelled hanging poly bags

Type A Contents

2 nylon plugs, 2 zinc plated studscrews and 2 collar nuts.

Type B Contents

2 nylon plugs, 2 zinc plated studscrews, 2 nylon bushes, 2 zinc plated nuts and 2 zinc plated washers.

• White cover caps
• Supplied in labelled hanging poly bags

• White or chrome cover caps
• Supplied in poly bags with hanging header card

DoP - Coach Screws

• White or chrome cover caps
• Side mounting
• Supplied in poly bags with hanging header card

DoP - Coach Screws

• Ready mixed, waterproof non setting putty
• Will seal ceramics, metals, vitreous enamels and PVCu
• Remains permanently flexible to allow for joint movement
• Overpaintable
• Damp resistant
• Contains anti-fungal compound to prevent growth in areas of high humidity ie bathrooms, kitchens and other sanitary applications
• Designed for sealing and bedding wc soil pipes, joints in sanitary ware, sinks and water fittings

SDS
TDS

• Pipe cement for non-pressurised PVCu and ABS thermoplastic pipes
• Non drip thixotropic solvent based product
• Long open time with rapid rate of bond strength development
• Applicator brush inside screw cap

Applications

• Specifically designed to bond non-pressurised uPVC and ABS pipes to themselves and each other in soil pipe, vent pipe, rainwater pipe, underground drain pipe and waste pipe applications.

SDS
TDS
DoP

• Forever white grout reviver restores discoloured and dirty grout to a bright white finish
• Apply to grout lines using the easy to use applicator included with the tube
• Contains SteriTouch for long lasting protection against discolouration caused by bacteria, mildew and mould regrowth

SDS
TDS

• Removes corrosion, sludge and scale from central heating systems
• Stops kettling caused by scale build up & removes cold zones
• Compatible with plastic tanks, micro bore and all metals including aluminium used in central heating systems

SDS
TDS

• Seals inaccessible leaks and weeping joints in sealed central heating systems
• Will reduce pressure loss from sealed systems
• Compatible with plastic tanks, micro bore and all metals including aluminium used in central heating systems

SDS
TDS

• 225 piece metric size O ring kit
• Contains 18 popular sizes
• Made from nitrile butadiene rubber
• Working temperature range -30°C to +120°C
• Will seal in most oil, steam and water applications
• O ring dimensions are inside diameter and thickness
• Suitable for a wide range of uses in many trades
• Supplied in a convenient re-sealable plastic case

• Robust plastic case supplied in wrap around retail sleeve