200 clip4fire and 200 fix4fire mixed tradetub

clip4fire

• 200 Fire rated steel cable clips accommodating 1-2.5mm T&E cable
• Designed to assist with compliance to 18th Edition
• Bright zinc plated 24mm nail manufactured from Manganese Steel renowned for its high impact strength and resistance to abrasion
• Successfully tested by Warrington Fire under BS EN 50200:PH120 and BS 8434-2
• Complies with BS5839 section 26.2e
• Tested to 930° for 120 minutes
• Resistant to fire, corrosion, solvents & chemicals

Fire test report on request

TDS
DoC - Reach

fix4fire

• 200 Fire rated all pan head screws 6 x 32mm
• For direct fastening into many common building substrates
• Suitable for light to medium duty anchoring
• Will fix into wood and plasterboard without pre-drilling
• Can be directly screwed into sandstone, concrete, brick and stone with a pre-drilled pilot hole of 5.5mm.
• In softer substrates, 5mm may be more appropriate
• Designed to assist with compliance to BS 7671 amendment 3 and the Wiring Regulations 18th Edition
• Ideal for fixing fire resistant clips, consumer units, back boxes, conduit, cable trunking, smoke alarms etc.
• Remove the need to use plastic wall plugs - which typically melt at circa 160°C

TDS
Ultimate Fixing Leaflet
DoC - Reach