• 237-507-920 | WD-40 400ml Cutting Oil | TDS | SDS

105 TWINSPRAY aerosols in Action Can TWINSPRAY Merchandiser Stand.

• Dimensions:
  Height 1,800mm
  Width 400mm
  Depth 300mm

Plus all these FREE:

• 4x Tubs TW-90 Wipes
• Ceiling Hanger Display
• Shelf Wobblers
• 6x Shelved Branded Stand
• FREE Shipping
• Stand Contains:

  15 x TF-90 Fast Drying Cleaning Solvent

  15 x SL-90 Synthetic Lubricating Oil with Boron Nitride

  15 x CT-90 Cutting & Tapping Fluid

  15 x AC-90 Multi-Purpose Lubricant

  15 x SP-90 Silicone Lubricant Spray

  15 x RP-90 Penetrating Oil

  15 x Dry PTFE Lubricant Food Grade

• High lubricating capacity
• Good penetration
• Pronounced general corrosion protection
• Ability to displace and seal out water and moisture
• Safe on all metal surfaces, does not stain
• Safe on most rubbers, plastics and coatings
• Multi-functional and easy-to-use
• Part of the “Green Force®” biodegradable+ formula family of products
• 2-in-1 spray system (TwinSpray)
• Convenient 360° (including inverted position) spray valve for aerosols
• Does not contain silicone

• Penetrating oil for rusted fasteners
• Freeze shocks rust down to -40˚C
• Lubricant rapidly penetrates rust
• Creates micro-fissures in rust
• 360˚ valve for all angle use
• Suitable for use on all metal components
• No silicone

SDS
TDS

• Extremely powerful dry blast, high discharge duster
• Non-Flammable
• Instantly removes dry, loose dirt and dust from hard to reach areas
• Powerful enough to force soot & debris from burner jets, heat exchangers & detectors
• Low GWP of 6

SDS
TDS

• High alcohol content (>80%) decontamination spray
• Tested in accordance with EN1276, EN1650 & EN 14476 
• Physically removes bacteria, viruses & fungus
• Leaves treated surfaces clean, dry & residue free
• Easy to use.. just spray & go
• Evaporates quickly with no need to rinse with water or a cloth

SDS
TDS

• All purpose lubricant and release spray
• Displaces moisture
• Penetrates
• Releases
• Cleans
• Loosens rusted parts
• Protects against rust
• Does not contain silicones
• Does not conduct electricity
• Available as H1 Food Grade certified by NSF#143539
• Available with non flammable CO₂ propellant

SDS - LPG
SDS - CO₂
SDS - Food
SDS - Bulk

TDS - Standard

NSF Certificate - Food

• A superior silicone lubricant for light lubrication in chemical and other industries where a clean, clear, dry lubricating film is preferred
• Stable over a wide range of temperatures
• Prevents sticking of rubber or plastic parts
• Can also be used as a release spray
• Can also be used as a cable pulling lubricant

TWINSPRAY

• Dual position straw, which allows precise application – precision jet (up) / broad spray (down)
• Non-slip ridged button
• Straw-stop to prevent over extension
• Locked-on TwinSpray actuator, it won’t get knocked off

SDS - Standard
TDS - Standard

• Extreme pressure heavy duty lubricant
• Multi-viscosity
• Starts thin for penetration then thickens for performance
• Resists throw off on moving chains
• Can be used as a general heavy duty lubricant and also as a slideway lubricant
• Ideal for all types of driving chains, bearings, conveyor systems and fast moving parts
• Available as H1 Food Grade certified by NSF#143540

SDS - Standard
SDS - Food

TDS - Standard

NSF Certificate - Food

SL-90 is a oil lubricant developed to provide excellent temperature and pressure resistance. The addition of boron nitride further reinforces the oil film and extends the relubrication interval for metal to metal contact. Upon application, SL-90 penetrates rapidly then thickens to form a tough, high-performance film which has high resistance to wear and creates an effective barrier against salt water, acids and alkalis. The innovative blend of corrosion inhibitors present in SL-90 provides highly durable protection on all types of metal.

• Multi-purpose lubricating oil
• Wide operating temperature range: −35°C to +200°C
• EP additives improve high load-carrying capacity
• Multi-viscosity capability with good anti-fling properties
• Resistant to water, steam, acid and alkalis

  SDS
  TDS

  TWINSPRAY

  • Dual position straw, which allows precise application – precision jet (up) / broad spray (down)
  • Non-slip ridged button
  • Straw-stop to prevent over extension
  • Locked-on TwinSpray actuator, it won’t get knocked off

• Water resistant general purpose grease with PTFE additive for superior performance
• Ideal for engineering, automotive, farm and DIY
• High quality lubricant, resistant to heat and water
• Provides lasting lubrication and protection
• Very good adhesive qualities
• Reduces wear of moving parts i.e. chains, gears, axles and locks

SDS
TDS

• Anti-seize lubricant reinforced with pure copper flakes and micro fine graphite flakes
• Waterproof, anti-corrosion, anti-rust, anti-acid and heat resistant
• Very high working temperature range
• Free from lead, zinc, nickel and silicone
• Effective anti-seize formulation prevents metal to metal contact, seizing, galling and corrosion fretting

SDS - Aerosol
SDS - Tin

TDS

• General-purpose clear grease
• Contains boron nitride to enhance lubrication performance
• Thermally stable with an operating temperature range from −12°C to +180°C
• Locks-out moisture and prevents corrosion

SDS
TDS

ESC Electrical Switch Cleaner

• A solvent cleaner for parts containing plastics or lacquer
• Leaves no residue
• Removes oil and grease
• Formulated for use on delicate equipment
• Suitable for metal, glass, plastic, tiles, gloss painted surfaces and stainless steel equipment

SDS
TDS

Isopyopyl Alcohol Cleaner

• Specially formulated to clean delicate electrical components containing plastic & rubber parts
• Will clean electrical switches & contacts, rapidly evaporating and leaving no residue
• Conforms to BS 1595/ASTM, DIN 770, DIN 53245
• Also used to remove flux residue after soldering, cleaning circuit boards and a variety of electronic components & switches in addition to general removal of dirt, grime and general soiling from delicate electrical equipment and components

SDS
TDS

• Powerful cleaner for brake & clutch parts
• Removes dirt, grime, dust, fluids, oils and other contaminants
• Can be used as a solvent and degreaser for metal parts
• Free from CFC’s
• Evaporates leaving no residue
• Eases brake squeal and clutch chatter
• Use without dismantling brakes or clutches

SDS
TDS

• General purpose cleaner suitable for metal, glass, plastics, tiles, mirrors, gloss painted surfaces and stainless steel equipment
• Will remove grease, oil and general soiling from most hard surfaces

SDS
TDS

• Ideal for use on all steels, even stainless steel & ceramics
• Extends cutting tool life
• High anti-weld features
• Does not contain silicones or CFC’s
• Reduces heat and improves finish
• Not suitable for yellow metals
• Makes drilling, hacksawing & thread cutting easier
• Allows higher rate of metal removal
• Ideal for pipe threading machines
• Available in foaming version, ideal for vertical surfaces where it clings with reduced run-off

SDS - Aerosol - Standard & Foaming
SDS - Squeeze Bottle
SDS - Tin

TDS - Aerosol - Standard, Squeeze Bottle & Tin
TDS - Aerosol - Foaming

• Rapid penetrating & release fluid for rusty nuts, bolts and fixings
• 30% less dense than water resulting in excellent penetrating power and releasing capabilities
• Protects against rust and corrosion

SDS
TDS

TWINSPRAY

• Dual position straw, which allows precise application – precision jet (up) / broad spray (down)
• Non-slip ridged button
• Straw-stop to prevent over extension
• Locked-on TwinSpray actuator, it won’t get knocked off

• Excellent penetration and spread
• Long term protection against rust
• Displaces moisture
• Dries to a soft, waxy, flexible film
• Ideal for giving longevity to parts and machinery
• Silicone free

SDS
TDS

• Quick drying, cleaning solvent & degreaser
• Ideal for rapid cleaning of electrical components & metal items
• Removes oil, grease, flux, tar, wax, carbon, grime and general soiling
• Fast drying, it leaves no surface residue

SDS
TDS

TWINSPRAY

• Dual position straw, which allows precise application – precision jet (up) / broad spray (down)
• Non-slip ridged button
• Straw-stop to prevent over extension
• Locked-on TwinSpray actuator, it won’t get knocked off

Multi Use Welders Fluid

• Anti spatter reduces adhesion on work, nozzles, jigs and fixtures
• Wire feed lubricant allows smooth wire flow
• Provides post weld corrosion protection
• Totally non-flammable CO² propellant
• Silicone free
• Reduces weld porosity
• Helps to stop wire sticking in welding machine lines

SDS
TDS

• Water based anti spatter reduces adhesion on work, nozzles, jigs and fixtures
• Enhanced 'low-risk' formulation
• Built-in post weld flash rust inhibitor
• Non-flammable. non-toxic and odourless
• Solvent, silicone and oil free
• Ideal for use on ferrous metals such as steel and cast iron undergoing welding

SDS
TDS

• Micro-porous foam shows up leaks at any location
• Ideal for use with gas detecting equipment
• Safe on skin, clothes, woodwork, metals and plastics
• Non-flammable compressed air propellant
• Safe in confined space
• Not for use on medical gas equipment where ingress into airways may occur

SDS
TDS

• Suitable for use on softwood, plywood, plasterboard, MDF, laminate board, hardboard, steel, plastic sheets, carpet tiles, underlay, fabric, foams and felts
• Variable spray valve control system for light, medium and heavy discharge rates

SDS
TDS