• Medium to hard grinding disc with zirconium corundum
• Combining a high effective removal performance with a long service life
• Ideal for grinding mild and stainless steel
• Manufactured to EN 12413

GRF Product

• Sintered diamond cutting disc with continuous rim
• Ideal for cutting wall, floor & stove tiles
• Can be used wet or dry
• Suitable for angle grinders
• Manufactured to EN 13236

ST Product

• Sintered segmented diamond cutting disc
• General purpose cutting blade
• Can be used wet or dry
• For use on all types of construction site materials
• Suitable for angle grinders
• Manufactured to EN 13236

• Zirconium corundum abrasive for long life
• Very good stock removal rate
• Effortless working without clogging
• Ideal for grinding mild & stainless steel

• Arbors (mandrels) supplied complete with pilot drills
• Incorporates an extra long pilot drill specifically designed to be used with the Morse holesaw range
• Supplied individually in hanging box packs

• Havoc demolition blades are specifically designed for “rough in” site applications. They will cut through all types of wood, wood composites, metal and nail embedded wood
• Renovator demolition blades are the ultimate heavy duty demolition and re-modelling blades. They cut through wood and metals without leaving jagged cut edges so there is no need for additional finishing
  
  Cards of 3 Blades

• Specifically designed for professional fire fighters and other emergency services to enable rapid extraction of injured persons
• Thicker blade provides minimum deflection and more stable cuts
• Greater blade depth for increased rigidity and heavier feed rates
• Straight tooth pitch enables quick and efficient cutting in multiple wall thicknesses
• Optimised tooth pattern reduces vibration and operator fatigue. Also reduces the possibility of blade binding in the cut
• Bi-metal construction gives long cutting life and high heat and wear resistance
  
  Cards of 3 Blades

• One pilot drill now covers the entire Morse holesaw range

• Designed to fit all popular machines with 1/2” shank
• Bi-metal blades reduce breakage and last longer than conventional carbon and high speed blades
• Shock resistant teeth
• High edge hardness
• Colbalt cutting edge offers more wear resistance
• High heat resistance
• Resists tooth strippage
• Long life
  
  Cards of 5 Blades

• Available for different types of cut
• For use in a wide range of materials
• For use with Black & Decker type machines
  Suitable for Black & Decker, Ryobi, Skil, Stayer, Pneutec, Kress & Wolf
• Alternative fitting to suit Bosch type machines (see above)

• Available for different types of cut
• For use in a wide range of materials
• For use with Bosch type machines suitable for: AEG, Bosch, Metabo, Hitachi, Makita (new type), Elu, Festool, Flex, Holzher, Mafell & Milwaukee
• Alternative fitting to suit Black & Decker type machines (see below)

• Large hole cutter kits, cut 40-200mm and 40-300mm diameter holes
• Integrated dust catcher provides operator safety, prevents mess and reduces clean up time
• Cuts a range of materials including aluminium, plasterboard, fibreboard, plywood, wood and acrylic sheets up to 25mm thick
• Cutting diameter and depth is easily adjustable within range of cutter
• Kits include 5 masonry drills, 5 wood drills, 3m tape measure and carpenters pencil

• Arbors (mandrels) complete with pilot drills
• Hexagon and SDS+ shank types available
• Supplied individually in hanging blister packs
• Pilot drill for both arbors

• Comprehensive range of different tip types and bit lengths
• Manufactured from high quality S2 tool grade steel
• Standard 1/4” hexagonal shank suitable for all tool attachments
• Supplied in hanging blister packs of 10pcs or individually

• Fast & coarse, heavy duty cuts in most types of wood and thick, tough metals
• Ground carbide teeth for 10 x longer life compared to Bi-metal blades
  
  

• Tungsten carbide tipped saw blades for wood cutting
• Precision ground carbide tips
• Supplied with standard bore size and reducing bushes where indicated
• Bush reduces bore size to fit a variety of shaft diameters making them more adaptable and cost effective
• Supplied individually in hanging blister packs

Applications

Suitable for wood (soft and hard), particle board, composite board, fibre board, wallboard and plastic.

• All accessories have standard 1/2” BSP (M) thread
• For ease of centring and starting a pilot drill is advisable
• Use an extension rod when more than 165mm depth is required
• Supplied individually in hanging wallets

• Very fast & stable cuts in most types of wood and metal. Thick blades with side set, milled teeth
• Bi-metal construction with 8% cobalt & electron beam welded teeth for increased durability and longer life
  
  Cards of 3 Blades
  
  

• Sintered segmented diamond cutting disc
• General purpose dry cutting blade
• For use on most types of construction site materials including concrete, brick & block
• Suitable for angle grinders
• Manufactured to EN 13236

• Vacuum brazed diamond tipped tile drills
• Diamond tip gives a smooth hole finish with reduced break out
• Wax filled for automatic lubrication & cooling
• Maximum performance per cut
• No water required
• Hexagon shank
• Supplied individually in hanging blister packs or as a 5 piece set in tough telescopic hanging case

Applications

Drilling the hardest man made materials including porcelain, ceramics, stone, marble and granite.

Recommendations

Full instructions included with each drill.

Best performance with corded mains powered drilling machine at highest speed with hammer action turned off.

Excessive pressure not required, the drill will perform better if allowed to run with light load at full speed.

• Dry diamond core drilling produces perfectly clean holes with no breakout and little in the way of vibration
• The quickest and most cost effective method of core drilling and requires no chiselling or making good
• Up to 20 times the life of a conventional tungsten carbide core drill bit
• Can be used on most popular building materials
• 1/2” BSP thread
• The drill should be used on the rotary setting and must not be used on the hammer setting
• Supplied individually boxed

Applications

Drilling of precision holes through walls for soil and waste pipes, balanced flues, electric fans, ventilation, water and gas pipes.

• Robust aluminium case for both sets
• Wheeled style with extendable handle for 10pc set

• New design and unique P95 precison tip
• Precision tip is diamond ground from best quality tungsten
• Asymmetric drill design reduces resistance ensuring that there is no wandering at the start of drilling
• The unique brazing method ensures no tip loss even in the toughest material
• Tri-Shank prevents slippage in chuck during use
• Supplied individually on hanging cards or as a 5 piece set in tough plastic hanging case

Applications

For drilling the hardest tiles and materials such as PEI class 5 porcelain, ceramics, fine stoneware, marble, concrete, engineering brick and even granite

Recommendations

The drill bit works best at low revolution speeds.

Drill machines with a variable speed trigger will achieve the best results.

The drill bit should be used on the rotary setting and must not be used on the hammer setting.

• Heavy duty rotary wire brushes for angle grinders and other suitable machines
• Twist knot type for fast and aggressive removal of rust, scale, paint and the general preparation of metal surfaces
• Crimped wire cup type is ideal for lighter duty applications including cleaning metal, wood and stone surfaces
• M14 thread fitting suitable for direct fitting to most angle grinders

• Available for many different types of cut
• For use in a wide range of materials
• Blade fitting to suit Black & Decker type machines including Black & Decker, Ryobi, Skil, Stayer, Kress & Wolf
• Alternative fitting to suit Bosch type machines (see above)

• Available for many different types of cut
• For use in a wide range of materials
• Blade fitting to suit Bosch type machines including: AEG, Bosch, Metabo, Hitachi, Makita (new type), Festool, Mafell & Milwaukee
• Alternative fitting to suit Black & Decker type machines (see below)

• Universal fitment Multi Tool blades
• Range of most popular types & sizes of blade
• Quick release fitment designed to work with Fein, Bosch, Makita, DeWalt and many more machines
• Chrome vanadium blades for wood, plastic and other soft materials
• Bi-metal blades will cut wood, plastic and are also able to cut some metals
• Supplied in hanging blister packs
  
  

• Standard abrasive disc with normal corundum
• Suitable for sanding metal, cast iron & wood
• High material removal rate
• Backing pad required for use
• Manufactured to EN 13743

• Good service life
• An all purpose disc
• Good material removal rate
• Suitable for all types of metal but primarily sheet steel, construction steel & welding seams
• Manufactured to EN 12413

• Very hard, highest quality materials
• An all round blade which provides fast cutting capacity and outstanding service
• Ideal for cutting pipes and thin walled sections
• Manufactured to EN 12413

• ISOTIN® coating provides a double titanium layer comprising a titanium carbide coating with a hardness of 95 HRc in addition to a titanium nitride surface treatment that gives a surface hardness of 3,000 HV for high wear resistance and longer service life
• Manufactured to DIN 3126 C 6,3 with standard 1/4” hexagon drive
• Optimised multistage hardening and annealing process gives 30% higher torque capacity compared with other bits
• Supplied on hanging cards or boxes

• Supplied without bits