Applications

• All steel screw fixing for direct fastening into many common building substrates
• Suitable for light to medium duty anchoring
• Will fix into wood and plasterboard without pre-drilling
• Can be directly screwed into sandstone, concrete, brick and stone with a pre-drilled pilot hole of 5.5mm. In softer substrates, 5mm may be more appropriate
• Designed to assist with compliance to BS 7671 amendment 3 and the Wiring Regulations 18th Edition
• Ideal for fixing fire resistant clips, consumer units, back boxes, conduit, cable trunking, smoke alarms etc.
• Remove the need to use plastic wall plugs - which typically melt at circa 160°C

Specification

• Made from heat treated C1018 - 1022 steel, 9.8 grade, with a Phillips recess, available with two head types
• Melting point of the material is circa 1500°C
• Tested to 975°C for a full 2 hours and retains its physical integrity
• Silver Ruspert® coated to 1000 hour salt spray specification for high corrosion resistance
• Resistant to fire, corrosion, solvents and chemicals

TDS
Ultimate Fixing Leaflet
DoC - Reach

• Counter display
• Holds 2,000 Fix4Fire screws and/or Clip4Fire clips (20 boxes of 100)
  

  Suggested mix:

  Fix4Fire – 10 boxes of Pan Head & 10 boxes of Oval CSK Head

  Clip4Fire – 10 boxes of 1-2.5mm & 10 boxes of 4-6mm

  Or a combination of Fix4Fire & Clip4Fire (maximum 20 boxes)

• Dimensions:
  Height 335mm
  Width 155mm
  Depth 260mm