Beavertape Multi-Purpose

• Multi-purpose indoor & outdoor all weather polyethylene cloth tape
• With natural rubber adhesive
• Suitable for many applications where a strong bond is required

DoC - Reach

• Heavy duty self adhesive flashing tape with 1.3mm minimum thickness of pressure sensitive modified bitumen
• Adhesive content specially formulated for flexibility at low temperatures and resistant to flow at high temperatures, but an immediate bond with hand pressure
• Aluminium/polyester facing with a high grade bitumen backing
• Bitumen thickness ensures close contact even on rough surfaces
• Durable, long lasting with an attractive appearance

Applications

For use on new building and for repair work. Flashing tape is ideal for flashing of flat and pitched roofs, sealing around columns, vents, roof lights, sealing parapets, waterproofing of coping & roof ridges, in addition to gutter & valley linings and repairs to damaged lead etc.

TDS

• General purpose paper masking tape
• Easy tear and unwind
• Gauge 0.125mm
• Ideal for decorating, drilling or spraying
• Available in a range of widths for different applications
• Shrink wrapped in sleeves

• Strong kraft paper tape
• Reinforced by two parallel corrosion resistant metal strips
• Ideal solution for dry lining and plastering archways, curved and irregular inside and outside corners and unusual angles
• In dispenser pack

TDS

• Gypsum based ready mixed filler for holes and cracks in plaster, render, and drywall applications
• Easy to apply with included built in spreader
• Can be sanded to provide a superior surface finish
• Finished surface can be sealed, painted, drilled and plugged
• Long storage life with resealable airtight stopper
• Off white colour
• Supplied in a counter top display of 12 or 24 tubes
• Dimensions:
  Height 243mm
  Width 168mm
  Depth 150mm (12 tube) / 276mm (24 tube)

SDS

• Top up pack of Mini Fill cartridges
• Pack contains 12 cartridges
• Off white colour

SDS

• Non adhesive PVC tape
• Diagonal stripes printed both sides
• For restricting access to hazardous areas
• In dispenser pack

TDS

• Adhesive plasticised dual colour PVC tape for different hazards
• Yellow/Black - hazardous areas and obstacles
• Red/White - fire hazards, extinguisher locations etc.
• Long lasting, tough and durable
• Gauge 0.16mm
• Suitable for marking out and identifying no go areas
• Shrink wrapped individual rolls

TDS

PTFE (Polyterafluoroethylene)

• Thread sealing tape
• Available in specifications suitable for general plumbing, potable water and gas supply fittings
• Offers a clean, quick and highly effective means of sealing threaded pipe fittings
• Shrink wrapped in sleeves
• tape conforms to BS 7786:1995, BS 6974:1989, BGC 1M/16, BS 5292 Type C
• roved water tape conforms to BS 7786:2006 Grade L, EN 751-3 & BS 6920-1:2000 for WRAS approval, certificate no. 1307500

• Provides visible warning of buried pipe or cable
• Tough resistant polyethylene
• Gauge 0.05mm
• Stays legible and colour fast in all soil conditions
• Available in a range of colours, printed to suit most common underground pipes and cables

TDS

Bunting Tape

• Site hazard warning pendants on a plastic rope
• Used to indicate limits of hazards or non-trafficable areas
• Also used to identify overhead cables and obstacles
• Alternating 150 x 50mm red & white pendants approximately 900mm apart on a 26m long plastic rope
• Supplied as a coiled hank in a polybag